dmesg - test io most popular

Return To test io most popular System Information

Linux version 4.10.0-19-generic (buildd@lcy01-13) (gcc version 6.3.0 20170321 (Ubuntu 6.3.0-10ubuntu1) ) #21-Ubuntu SMP Thu Apr 6 17:04:57 UTC 2017 (Ubuntu 4.10.0-19.21-generic 4.10.8)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000da949fff] usable
BIOS-e820: [mem 0x00000000da94a000-0x00000000da994fff] ACPI NVS
BIOS-e820: [mem 0x00000000da995000-0x00000000da99cfff] ACPI data
BIOS-e820: [mem 0x00000000da99d000-0x00000000dabbafff] reserved
BIOS-e820: [mem 0x00000000dabbb000-0x00000000dabbbfff] usable
BIOS-e820: [mem 0x00000000dabbc000-0x00000000dabcbfff] reserved
BIOS-e820: [mem 0x00000000dabcc000-0x00000000dabd9fff] ACPI NVS
BIOS-e820: [mem 0x00000000dabda000-0x00000000dac01fff] reserved
BIOS-e820: [mem 0x00000000dac02000-0x00000000dac44fff] ACPI NVS
BIOS-e820: [mem 0x00000000dac45000-0x00000000dae7ffff] reserved
BIOS-e820: [mem 0x00000000dae80000-0x00000000daffffff] usable
BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI:                  /DH61BR, BIOS BEH6110H.86A.0045.2012.0711.1948 07/11/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask E00000000 write-back
  1 base 200000000 mask FE0000000 write-back
  2 base 0DB800000 mask FFF800000 uncachable
  3 base 0DC000000 mask FFC000000 uncachable
  4 base 0E0000000 mask FE0000000 uncachable
  5 base 21FE00000 mask FFFE00000 uncachable
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
total RAM covered: 8118M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 128M 	num_reg: 8  	lose cover RAM: 0G
e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fce20-0x000fce2f] mapped at [ffff9cc5000fce20]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9cc500097000] 97000 size 24576
BRK [0x45228000, 0x45228fff] PGTABLE
BRK [0x45229000, 0x45229fff] PGTABLE
BRK [0x4522a000, 0x4522afff] PGTABLE
BRK [0x4522b000, 0x4522bfff] PGTABLE
BRK [0x4522c000, 0x4522cfff] PGTABLE
BRK [0x4522d000, 0x4522dfff] PGTABLE
BRK [0x4522e000, 0x4522efff] PGTABLE
BRK [0x4522f000, 0x4522ffff] PGTABLE
BRK [0x45230000, 0x45230fff] PGTABLE
BRK [0x45231000, 0x45231fff] PGTABLE
BRK [0x45232000, 0x45232fff] PGTABLE
RAMDISK: [mem 0x32e07000-0x356fafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0450 000024 (v02 INTEL )
ACPI: XSDT 0x00000000DA995068 00004C (v01 INTEL  DH61CR   00000043 AMI  00010013)
ACPI: FACP 0x00000000DA99C6C8 0000F4 (v04 INTEL  DH61CR   00000043 AMI  00010013)
ACPI: DSDT 0x00000000DA995140 007587 (v02 INTEL  DH61CR   00000012 INTL 20051117)
ACPI: FACS 0x00000000DABD1F80 000040
ACPI: APIC 0x00000000DA99C7C0 000072 (v03 INTEL  DH61CR   00000043 AMI  00010013)
ACPI: SSDT 0x00000000DA99C838 000102 (v01 INTEL  DH61CR   00000001 MSFT 03000001)
ACPI: MCFG 0x00000000DA99C940 00003C (v01 INTEL  DH61CR   00000043 MSFT 00000097)
ACPI: HPET 0x00000000DA99C980 000038 (v01 INTEL  DH61CR   00000043 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
NODE_DATA(0) allocated [mem 0x21fdd1000-0x21fdfbfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000021fdfffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009cfff]
  node   0: [mem 0x0000000000100000-0x000000001fffffff]
  node   0: [mem 0x0000000020200000-0x000000003fffffff]
  node   0: [mem 0x0000000040200000-0x00000000da949fff]
  node   0: [mem 0x00000000dabbb000-0x00000000dabbbfff]
  node   0: [mem 0x00000000dae80000-0x00000000daffffff]
  node   0: [mem 0x0000000100000000-0x000000021fdfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
On node 0 totalpages: 2073703
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 13916 pages used for memmap
  DMA32 zone: 890571 pages, LIFO batch:31
  Normal zone: 18424 pages used for memmap
  Normal zone: 1179136 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
PM: Registered nosave memory: [mem 0xda94a000-0xda994fff]
PM: Registered nosave memory: [mem 0xda995000-0xda99cfff]
PM: Registered nosave memory: [mem 0xda99d000-0xdabbafff]
PM: Registered nosave memory: [mem 0xdabbc000-0xdabcbfff]
PM: Registered nosave memory: [mem 0xdabcc000-0xdabd9fff]
PM: Registered nosave memory: [mem 0xdabda000-0xdac01fff]
PM: Registered nosave memory: [mem 0xdac02000-0xdac44fff]
PM: Registered nosave memory: [mem 0xdac45000-0xdae7ffff]
PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
PM: Registered nosave memory: [mem 0xdfa00000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdfa00000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff9cc71fa00000 s107800 r8192 d31464 u524288
pcpu-alloc: s107800 r8192 d31464 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2041278
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8034252K/8294812K available (9061K kernel code, 1666K rwdata, 3816K rodata, 2228K init, 2364K bss, 260560K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:524544 nr_irqs:456 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2992.948 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.89 BogoMIPS (lpj=11971792)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 34175 entries in 134 pages
smpboot: Max logical packages: 1
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-3330 CPU @ 3.00GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      8
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (23943.58 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xda94a000-0xda994fff] (307200 bytes)
PM: Registering ACPI NVS region [mem 0xdabcc000-0xdabd9fff] (57344 bytes)
PM: Registering ACPI NVS region [mem 0xdac02000-0xdac44fff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 16:48:21, date: 06/01/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9CC715CE6400 0003E0 (v01 AMI    IST      00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9CC715D4C000 000120 (v01 AMI    CST      00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfe429000-0xfe42900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfe400000-0xfe41ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfe428000-0xfe428fff]
pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfe427000-0xfe4273ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfe420000-0xfe423fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfe426000-0xfe4263ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfe425000-0xfe4257ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfe424000-0xfe4240ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
pci 0000:01:00.0: [1283:8892] type 01 class 0x060401
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01-02]
pci 0000:01:00.0: PCI bridge to [bus 02] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xda94a000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdabbc000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x0290-0x029f] has been reserved
system 00:01: [io  0x0778-0x077f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 3]
pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io  0x0400-0x0453] has been reserved
system 00:07: [io  0x0458-0x047f] has been reserved
system 00:07: [io  0x1180-0x119f] has been reserved
system 00:07: [io  0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [io  0x0454-0x0457] has been reserved
system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: PCI bridge to [bus 01-02]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xdfa00000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 41936K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd694a000-0xda94a000] (64MB) mapped at [ffff9cc5d694a000-ffff9cc5da949fff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1496335701.656:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: Signaling PME with IRQ 24
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffb2dfc1800000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe427000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe426000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.0-19-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x306a9, pf=0x2, revision=0x12
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 8e99ee5b0fead84880b7849b477f2b92957907bc'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
  Magic number: 5:558:842
rtc_cmos 00:05: setting system clock to 2017-06-01 16:48:22 UTC (1496335702)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2228K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1164K
Freeing unused kernel memory: 280K
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
[drm] Initialized
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425100 irq 25
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e8:40:f2:3a:43:fa
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 500000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
e1000e 0000:00:19.0 eno1: renamed from eth0
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 1-1: new high-speed USB device number 2 using ehci-pci
[drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
usb 2-1: new high-speed USB device number 2 using ehci-pci
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD5000AVVS-63H0B1, 05.04C05, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AVVS-6 4C05 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
 sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
usb 1-1.1: New USB device found, idVendor=046d, idProduct=c535
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: Dell Wireless Mouse WM123
usb 1-1.1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Dell Wireless Mouse WM123 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C535.0001/input/input3
hid-generic 0003:046D:C535.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Dell Wireless Mouse WM123] on usb-0000:00:1a.0-1.1/input0
input: Logitech Dell Wireless Mouse WM123 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C535.0002/input/input4
random: fast init done
hid-generic 0003:046D:C535.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Dell Wireless Mouse WM123] on usb-0000:00:1a.0-1.1/input1
usb 1-1.4: new low-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 2993.201 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b252f03e9a, max_idle_ns: 440795342230 ns
usb 1-1.4: New USB device found, idVendor=2188, idProduct=0ae1
usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.4: Product:  USB OPTICAL MOUSE
input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:2188:0AE1.0003/input/input5
hid-generic 0003:2188:0AE1.0003: input,hidraw2: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.4/input0
clocksource: Switched to clocksource tsc
floppy0: no floppy controllers found
work still pending
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
random: crng init done
systemd[1]: Listening on Journal Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Starting Uncomplicated firewall...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
systemd-journald[260]: Received request to flush runtime journal from PID 1
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
EDAC MC: Ver: 3.0.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
gpio_ich: GPIO from 436 to 511 on gpio_ich
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: RAPL package 0 domain package locked by BIOS
floppy0: no floppy controllers found
Adding 78124028k swap on /dev/sda1.  Priority:-1 extents:1 across:78124028k FS
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1496335717.418:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=679 comm="apparmor_parser"
audit: type=1400 audit(1496335717.418:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=680 comm="apparmor_parser"
audit: type=1400 audit(1496335717.430:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=685 comm="apparmor_parser"
audit: type=1400 audit(1496335717.442:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/mediascanner-service-2.0" pid=688 comm="apparmor_parser"
audit: type=1400 audit(1496335717.442:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ubuntu-printing-app" pid=689 comm="apparmor_parser"
audit: type=1400 audit(1496335717.446:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unity8-dash" pid=690 comm="apparmor_parser"
audit: type=1400 audit(1496335717.446:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=682 comm="apparmor_parser"
audit: type=1400 audit(1496335717.446:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=682 comm="apparmor_parser"
audit: type=1400 audit(1496335717.446:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=682 comm="apparmor_parser"
audit: type=1400 audit(1496335717.446:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=682 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
powercap intel-rapl:0: package locked by BIOS, monitoring only
ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/00:00:00:2a:00/08:00:00:00:00/40 tag 0 ncq dma 1048576 in
                        res 41/40:00:fd:2b:00/00:00:00:00:00/40 Emask 0x409 (media error) 
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 2a 00 00 08 00 00
blk_update_request: I/O error, dev sda, sector 11261
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x20000000 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:e8:f8:2b:00/00:00:00:00:00/40 tag 29 ncq dma 4096 in
                        res 41/40:00:fd:2b:00/00:00:00:00:00/40 Emask 0x409 (media error) 
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] tag#29 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] tag#29 Sense Key : Medium Error [current] 
sd 0:0:0:0: [sda] tag#29 Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] tag#29 CDB: Read(10) 28 00 00 00 2b f8 00 00 08 00
blk_update_request: I/O error, dev sda, sector 11261
Buffer I/O error on dev sda, logical block 1407, async page read
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x40000003 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/00:f0:00:2a:00/0a:00:00:00:00/40 tag 30 ncq dma 1310720 in
                        res 41/40:00:fd:2b:00/00:00:00:00:00/40 Emask 0x409 (media error) 
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] tag#30 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] tag#30 Sense Key : Medium Error [current] 
sd 0:0:0:0: [sda] tag#30 Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] tag#30 CDB: Read(10) 28 00 00 00 2a 00 00 0a 00 00
blk_update_request: I/O error, dev sda, sector 11261
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x10000000 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:e0:f8:2b:00/00:00:00:00:00/40 tag 28 ncq dma 4096 in
                        res 41/40:00:fd:2b:00/00:00:00:00:00/40 Emask 0x409 (media error) 
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] tag#28 Sense Key : Medium Error [current] 
sd 0:0:0:0: [sda] tag#28 Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] tag#28 CDB: Read(10) 28 00 00 00 2b f8 00 00 08 00
blk_update_request: I/O error, dev sda, sector 11261
Buffer I/O error on dev sda, logical block 1407, async page read
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x380 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/00:38:00:2a:00/0a:00:00:00:00/40 tag 7 ncq dma 1310720 in
                        res 41/40:00:fd:2b:00/00:00:00:00:00/40 Emask 0x409 (media error) 
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] tag#7 Sense Key : Medium Error [current] 
sd 0:0:0:0: [sda] tag#7 Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 00 00 2a 00 00 0a 00 00
blk_update_request: I/O error, dev sda, sector 11261
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x20 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:28:f8:2b:00/00:00:00:00:00/40 tag 5 ncq dma 4096 in
                        res 41/40:00:fd:2b:00/00:00:00:00:00/40 Emask 0x409 (media error) 
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] tag#5 Sense Key : Medium Error [current] 
sd 0:0:0:0: [sda] tag#5 Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] tag#5 CDB: Read(10) 28 00 00 00 2b f8 00 00 08 00
blk_update_request: I/O error, dev sda, sector 11261
Buffer I/O error on dev sda, logical block 1407, async page read
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0xe000 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/00:68:00:2a:00/0a:00:00:00:00/40 tag 13 ncq dma 1310720 in
                        res 41/40:00:fd:2b:00/00:00:00:00:00/40 Emask 0x409 (media error) 
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] tag#13 Sense Key : Medium Error [current] 
sd 0:0:0:0: [sda] tag#13 Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] tag#13 CDB: Read(10) 28 00 00 00 2a 00 00 0a 00 00
blk_update_request: I/O error, dev sda, sector 11261
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x2000 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:68:f8:2b:00/00:00:00:00:00/40 tag 13 ncq dma 4096 in
                        res 41/40:00:fd:2b:00/00:00:00:00:00/40 Emask 0x409 (media error) 
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] tag#13 Sense Key : Medium Error [current] 
sd 0:0:0:0: [sda] tag#13 Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] tag#13 CDB: Read(10) 28 00 00 00 2b f8 00 00 08 00
blk_update_request: I/O error, dev sda, sector 11261
Buffer I/O error on dev sda, logical block 1407, async page read
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1e000000 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/00:c8:00:2a:00/0a:00:00:00:00/40 tag 25 ncq dma 1310720 in
                        res 41/40:00:fd:2b:00/00:00:00:00:00/40 Emask 0x409 (media error) 
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] tag#25 Sense Key : Medium Error [current] 
sd 0:0:0:0: [sda] tag#25 Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] tag#25 CDB: Read(10) 28 00 00 00 2a 00 00 0a 00 00
blk_update_request: I/O error, dev sda, sector 11261
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x2000000 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:c8:f8:2b:00/00:00:00:00:00/40 tag 25 ncq dma 4096 in
                        res 41/40:00:fd:2b:00/00:00:00:00:00/40 Emask 0x409 (media error) 
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] tag#25 Sense Key : Medium Error [current] 
sd 0:0:0:0: [sda] tag#25 Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] tag#25 CDB: Read(10) 28 00 00 00 2b f8 00 00 08 00
blk_update_request: I/O error, dev sda, sector 11261
Buffer I/O error on dev sda, logical block 1407, async page read
ata1: EH complete
usb 1-1.4: USB disconnect, device number 4

Return To test io most popular System Information